JAGUAR-A4 Desktop Automatic SMT P&P Machine
Product Advantages
This high precision system is equipped with 6 cameras: 1for Mark recognition , 1for 500 million pixels high precision recognition camera, and 4 for synchronous high-speed recognition. Can effectively mount 0402-5050 components, LED beads, diodes, transistors, SOP, 40mm*40mm range pin pitch ≥0.3mm chip QFP, BGA etc.
Fast Speed: the max. mounting speed: 7000CPH, average mounting speed: 5000CPH.
Full Automation: With rail guide, could be connected to other machines to achieve inline operation, thus greatly reduce labor costs, only need one person to complete the work.
Strong Stability: Panasonic Servo Motor and Drive, TBI high-precision grinding ball screw rod + heavy-duty linear guide, Japan Vacuum generator, JUKI high-precise nozzles, automatic feeding integrated system and high-configuration IPC - High precision, strong stability, promise 24-hour mounting stably.
Product Parameters
|
Feeder No. |
46 |
|
Mounting Heads |
4 (No need to change Nozzle) |
|
Average Power |
600W |
|
Positioning Accuracy |
0.01mm |
|
Nozzle Buffering Range |
5.0mm |
|
Power Supply |
220V, 50Hz |
|
Compressed Air |
0.5-06Mpa |
|
Driving Motor |
Panasonic servo motor |
|
Mounting optimization |
Program automatically optimization, continue production after mounting completed, no need to wait for resetting |
|
Nozzle Vacuum Source |
High-speed on-off vacuum generator with vacuum damage |
|
Max. PCB Area |
480x300mm |
|
XY Max. Movement Range |
556x680mm |
|
Z Axis Max. Movement Range |
20mm |
|
Belt Type Feeder |
8/12/16/24/32mm feeders, stick feeder |
|
Max. Mounting Speed |
7000CPH |
|
Average Mounting Speed |
5000CPH (Visual) |
|
Dimensions |
1180x1080x880mm |
|
Product Weight |
240KGS |
|
XYZ Drive Guide Rail |
TBI High-precision heavy-duty straight-line guide rail |
|
Motion Drive System |
Panasonic High speed DPSdriver |
|
Operating System |
Support Windows XP, Win7 operating system |
|
Component Angle |
0~360, synchronized rotation in motion |
|
X/Y Running Mode |
Intelligent curve acceleration and deceleration linear linkage |
|
Placement Mode |
Manual, semi-automatic, fully automatic |
|
Convenient Button |
Offline, reset, automatic operation, clear alarm |
|
Alarm when open the cover |
Reducing speed or stop |
|
Automated connection |
Can automatically connect signal equipment at both end |
|
Rail Guide Adjusting Method |
Manual + Automatic |
|
Visual Display |
15"industrial control display ratio 4:3, resolution 1024x768 |
|
Programming Mode |
Point-to-point programming, visual programming, PCB file coordinates inputting, etc. |
|
Recognition Camera No. |
1x Mark camera, 4x high-speed camera, 1x 500 million pixels high-precision camera |
Applicable Mounting Range: Suitable for 0402, 0603, 0805, 1206, LED beads, diodes, transistors, SOT, 40mm*40mm range pin pitch ≥0.3mm QFP, BGA etc.
JAGUAR-A6L Automatic SMT P&P Machine
Product Advantages
This solution has 8 cameras: 1 for mark recognition, 1 high precision, and 6 high-speed recognition cameras, synchronously recognize, effectively ensure mounting speed and precision.
XY drive uses imported high-precision grinding ball screw rod + imported heavy-duty linear guide, quick positioning, low noise, high precision.
Panasonic Servo Motor and Drive, TBI precise linear guide, Japan Vacuum generator, JUKI high-precise nozzles, automatic feeding integrated system and high-configuration IPC - High precision, strong stability, promise 24-hour mounting stably.
Three-section transmitting boards-automatic connection from left to right (The first section is waiting for mounting, the second section is responsible for mounting (When the PCB board finishes mounting and transmits to the third section, the first section also receives the demand to prepare a new board simultaneously.), the third section transmits the board from the PnP machine to reflow oven. Effectively saves time of transmitting boards and improves efficiency.
Product Specification
|
Feeder No. |
60 |
|
Mounting Heads |
6 |
|
Average Power |
600W |
|
Positioning Accuracy |
0.01mm |
|
Nozzle Buffering Range |
5.0mm |
|
Power Supply |
220V, 50Hz |
|
Compressed Air |
0.5-06Mpa |
|
Driving Motor |
Panasonic servo motor |
|
Recognition Method |
Six heads recognize synchronously |
|
Nozzle Vacuum Source |
High-speed on-off vacuum generator with vacuum damage |
|
Max. Circuit Board Area |
650x370mm |
|
XY Max. Movement Range |
700x619mm |
|
Z Axis Max. Movement Range |
20mm |
|
Belt Type Feeder |
8/12/16/24mm feeders, stick feeder, tube chip |
|
Max. Mounting Speed |
13000CPH |
|
Average Mounting Speed |
10000CPH (Visual) |
|
Dimensions |
1335x1230x1420mm |
|
Product Weight |
500KGS |
|
XYZ Drive Guide Rail |
TBI High-precision heavy-duty straight-line guide rail |
|
Motion Drive System |
Panasonic High speed DPS driver |
|
Operating System |
Support Windows XP, Win7 operating system |
|
Component Angle |
0~360°, synchronized rotation in motion |
|
X/Y Running Mode |
Imported TBI high-precision ball screw rod + imported TBI heavy-duty linear guide |
|
Mark Point Positioning |
Full automation |
|
Intelligent Alarm |
Automatic correction and supplement, alarm when materials shortage |
|
Board Input Method |
Three-section transmitting boards-automatic connection from left to right, automatic PCB transmission positioning |
|
Visual Display |
15" industrial control display ratio 4:3, resolution 1024X768 |
|
Programming Mode |
Point-to-point programming, visual programming, PCB file coordinates inputting, etc. |
|
Recognition Camera No. |
1 Mark recognition camera, 6 high speed recognition camera, 1 high-precision recognition camera |
Applicable Mounting Range: Suitable for 0201, 0402, 0603, 0805, 1206, LED lamp beads, diodes, transistors, SOT, 40mm*40mm range pin pitch ≥0.3mm QFP, BGA etc.
JAGUAR-A8L Automatic SMT P&P Machine
Product Advantages
The system comprises 10 cameras: 1 for Mark recognition camera, 8 for high-speed recognition, an 8 million pixel high-precision recognition camera, to synchronously recognize, effectively ensuring mounting speed and precision.
Featuring an integrated JUKI nozzle spring buffer, reducing the risk of component drops when picking and placement. 4 groups of components can be picked up at the same time, which improves the picking up speed and work efficiency of the machine.
XY drives adopt imported TBI high precision lapping ball screw + heavy-load linear guide, fast positioning, low noise, and high precision. Precision control error can reach 0.018mm.
There is a Panasonic A6 series AC servo motor, the encoder with 23Bit precision, 8 times higher than A5 series.
The 2x 17” displays, operate front and rear simultaneously, making the operation easier, saving operators' time, no need to run around the machine.
3-section automatic inputting board mode: board waiting mounting, board mounting, and board waiting outputting, which greatly reduces the transmission distance and increases the number of boards. Save much time and improving efficiency.
The system utilizes negative pressure to pick up components, with a built-in high-efficiency & energy-saving vacuum pump and vacuum tank, equipped with the latest vacuum damage system. This greatly improves the efficiency of picking up the components, eliminating noise caused by positive pressure turning into negative pressure, delay and reduce the frequency of air compressor start-up, effectively improve the life of air compressor.
Can hold 70pcs of 8mm pneumatic feeders simultaneously, reserved 38 electric feeder interfaces, can switch the feeder type at random. Accurately mount 0201-5050 resistance, LED lamp beads, diodes, transistor, SOP, chip QFP-256, 45mm*45mm range QFP, BGA etc.
Conveyor’s width adjustment adopts bilateral transmission structure to improve the width modulation accuracy and stability, effectively avoiding the different width of both ends after adjusting.
Product Specification
|
Feeder No. |
70 (Front 38, rear 32) |
|
Mounting Heads |
8 |
|
Average Power |
750W |
|
Positioning Accuracy |
0.01mm |
|
Nozzle Buffering Range |
5.0mm |
|
Weight |
550KGS |
|
Power Supply |
220V, 50Hz |
|
Compressed Air |
0.5-06Mpa |
|
Driving Motor |
Panasonic servo motor |
|
Rail Guide Adjustment Mode |
Manual + Automatic |
|
Mounting optimization |
Program automation, continue production after mounting completed, no need to wait for resetting |
|
Nozzle Vacuum Source |
High-efficiency & energy-saving vacuum pump and vacuum tank |
|
Convenient Button |
Offline, reset, automatic operation, clear alarm |
|
Max. Circuit Board Area |
650x380mm |
|
XY Max. Movement Range |
750x670mm |
|
Z Axis Max. Movement Range |
20mm |
|
Belt Type Feeder |
8/12/16/24/32mm feeders, vibration feeder |
|
Max. Mounting Speed |
15000CPH |
|
Average Mounting Speed |
12000CPH (Visual) |
|
Dimensions |
1500x1280x1410mm |
|
IC Tray No. |
Support 12 sets |
|
XYZ Drive Guide Rail |
TBI High-precision heavy-duty straight-line guide rail |
|
Motion Drive System |
Panasonic High speed DPS driver |
|
Operating System |
Independent development based on Windows operating system, support Windows XP, Win7 |
|
Component Angle |
0~360°, synchronized rotation in motion |
|
X/Y Running Mode |
Intelligent curve acceleration and deceleration linear linkage |
|
Alarm when open covers |
deceleration or stop |
|
X/Y Transmission Mode |
Imported TBI high-precision ball screw rod + imported TBI heavy-duty linear guide |
|
Mounting Mode |
Manual. Semi-automatic, Automatic |
|
Operating Window |
Dual displays operation front and rear, more humane design |
|
Automated connection |
Can automatically connect signal equipment at both end |
|
Board Input Method |
Three-stage transmitting boards-automatic connection from left to right, automatic PCB transmission positioning |
|
Visual Display |
2pcs of 17” industrial control display ratio 4:3, resolution 1280X1024 |
|
Programming Mode |
Point-to-point programming, visual programming, PCB file coordinates inputting, etc. |
|
Recognition Camera No. |
1 Mark recognition camera, 8 high speed recognition camera, 1 high-precision 8 million pixel recognition camera |
Applicable Mounting Range: Suitable for 0201, 0402, 0603, 0805, 1206, LED lamp beads, diodes, transistors, SOT, 45mm*45mm range pin pitch ≥0.3mm QFP, BGA etc.